OptiLine Performance Duallens - SA New
-
-
0,5 - 1,0 mm
-
left asymmetrical
-
right asymmetrical
• Low UGR due to single lens design
• Good light quality due to optimized microstructure on the surface
• Toolless assembly of optics & LED-board possible in one work step
• Flexibility due to clip fastening suitable for luminaire sheets (0.5 - 1.0 mm) and aluminium profiles
• Suitable for SELV and non SELV applications
• Only one end cap for both sides
Application areas: | Linear- and panel lightsOffice: Work place lighting and corridor lightingShop: General lighting and corridor lightingIndustry: Park stores, department stores and warehousesPublic applications: Corridors and stairways |
---|---|
Ausführung: | optimized for use with terminal blocks for rear side wiring through clearances/cut-outs in the affected lenses. |
Color: | clear |
Height: | 8,4 mm |
IP-Protection type: | IP40 |
Length: | 280 mm |
Light Distribution: | Single asymmetric |
Material: | PC |
Note warranty conditions: | *Warranty conditions of BJB GmbH & Co. KG as stated as available via the Internet under https://www.bjb.com/en/legal-information/general-terms-and-conditions/ are valid. |
Operating temperature: | max. 110°C |
Optical efficiency: | 90 % (Samsung LM281B+Pro) |
Packaging quantity: | 84 |
Pitch distance: | 14 mm |
Producttype: | OptiLine Performance Duallens |
Series: | OptiLine Perform - single-row 1-click Optics - Pitch-dependent |
Surface: | Micro structure |
Utilityfilm Link: | https://youtu.be/1DNfsMp1Op4 |
Weight: | 46,5 g |
Width: | 40 mm |
directional characteristic: | SA |
mounting method 1: | Snap-in mounting |
number of LEDs per module: | 2 LEDs per pitch |
Available Downloads
Available CAD Downloads
Certifications
Article Number | Status | Description | Documents |
---|
-
-
0,5 - 1,0 mm
-
left asymmetrical
-
right asymmetrical