LED oven lamp Spot
- 
                  
- 
                  0,5 - 1,0 
- 
                  
Tiltable LED oven lamp with light conducting glass rod
Symmetrical light characteristic
Screw fixing: for M3 screws 
alternatively: push in fixing by using the P2F fixing element 28.905 
• Due to the variable length of the light conducting glass rod, different installation heights in the oven are possible. 
• Variable LED parameters (CCT, CRI, number) 
• Protection class III due to operation on SELV voltage 
• Max. possible current of the lamp is to be determined in the most unfavorable operating condition 
• The choice of our products, as well as the technically correct installation according to the relevant regulations (e.g. IEC 62031 and IEC60335) , are the sole responsibility of the user. 
Special versions with higher requirements such as steam tightness, with microwave shielding or pyrolysis suitability on request.
| Application areas: | Home + Professional | 
|---|---|
| Ausführung: | Dimmable with suitable control gear | 
| Colour temperature: | 3.500 K | 
| Durability: | Average life time (L70 / B50) = 5.000 h (according to BJB test requirements) | 
| LED?: | yes | 
| Lamp: | LED | 
| Luminous flux Ta25° C If typical: | 190 lm | 
| Material: | Heat sink: Aluminium, anodized; Housing: PET; Glass light guide rod: Borosilicate glass | 
| Max. Temperature at Tc point: | 110° C | 
| Note on electrical and optical tolerances: | Tolerances of optical and electrical data: ±10 %. | 
| Note warranty conditions: | *Warranty conditions of BJB GmbH & Co. KG as stated as available via the Internet under https://www.bjb.com/en/legal-information/general-terms-and-conditions/ are valid. | 
| Operating current: | 1.000 mA | 
| Operating mode: | Constant current | 
| Other: | Output: 3.0 W - Luminous flux @Ta25° C @ If typical: 190 lm | 
| Output: | 3.0 W | 
| Packaging quantity: | 54 | 
| Producttype: | LED Oven Lamp | 
| Series: | LED | 
| Suitable for: | Combined ovens - Microwaves - Pyro - Steam | 
| number of LEDs per module: | 1 | 
| old article number: | 77.115.2001.00 | 
Available CAD Downloads
Certifications
| Article Number | Status | Description | Documents | 
|---|---|---|---|
| 77.115.2001-0 | ENEC_Zeichen-ENEC_Approval5772810 | 
- 
                  
- 
                  0,5 - 1,0 
- 
                  
 
                                             
                                                                             
                                                                             
                                                                             
                                                                             
                                                                             
                                                                             
                                                                             
                                                                