Flat Terminal block 5 poles with earth bracket, snap-in pins Aluprofile LNEZDA+DA- and contact opening function 46.485.4116.50

PDF

Part no.: 46.485.4116.50
Package: 500
Color: white

CAD
CAD
Temperature rating
Declaration of the minimum and maximum permissible environmental temperatures according to IEC 60998 / VDE 0613, part 1 and 2
Twin push wire terminals
max. ø 1,8 mm

For tinned wire ends within the cross sectional range stated
(for the gauge or cross-sectional range indicated).
max. ø 1,8 mm

For wire ends with ferrule to the maximum diameter stated
The cable and termination used must be compatible in respect of: Diameter and length of the ferrule, strip length of insulation. For further information see DIN 46228, part 3, size 1 - 7 Material and surface of ferrules have to correspond to the relevant application. For temperatures > 200°C we recommend ferrules of steel, nickel plated.
For solid conductors
(for the gauge or cross-sectional range indicated).
For 7-stranded wire ends within the cross sectional range stated.
0,5 - 1,2

Mounting material thickness (in mm)
Automatic final testing of light fittings
Rating
Declaration of rated current in Amps.
Rating
Declaration of rated voltage in volts.

Any questions?

Flat terminal block 5 pole with contact opening function Upper terminal connection: 0.5 - 2.5... more

Close menu

Product information "Flat Terminal block 5 poles with earth bracket, snap-in pins Aluprofile LNEZDA+DA- and contact opening function"

Flat terminal block 5 pole with contact opening function
Upper terminal connection: 0.5 - 2.5 mm²
Direct insertion of solid wire ends and finely stranded wire ends by using the contact opening function Contact opening function - also for release of already inserted wires

Lower terminal connection:
- 0.5 - 2.5 mm² for solid wire ends
- 1.5 - 2.5 mm2 for rigid and stranded wire ends
- Wire release function by twisting and pulling

Strip length: 9 ±1 mm
Top Test openings
Approvals: ÖVE Reg. Compliance with creepage distances and clearances (eg according to EN 60598) has to be ensured by the structural design of the luminaire.

Product name:	Flat Terminal block 5 poles with earth bracket, snap-in pins Aluprofile LNEZDA+DA- and contact opening function
Mounting method 1:	snap-in pins Aluprofile LNEZDA+DA- for use in extruded aluminum profiles with M4 profil groove
Material:	Housing: PA, beige, PC, white
Marking:	L N ⏚DA+ DA-
Earth contact:	Earth bracket
Material thickness:	0.5 - 1.2
Contact opening:	With integral cable release
Quantity of poles:	5
Pkg.:	500