SMD Push through terminal block - 1 pole with cover

46.151.2001.50
PDF data sheet
  • 46.151.2001.50
  • 9800
  • LED-SMD-Line
    LED-SMD-Line

    SMD terminal block

  • Uimp 2,5kV
    Rated impulse voltage

    Rated impulse voltage (Uimp) indicates the peak value, to which the component can be used without failure.

  • einz
    Single pushwire terminals
  • abisolier 8.0 + 1 mm
    Stripped length

    Stripped length in mm

  • 7adr
    For 7-stranded wire ends within the cross sectional range stated.
  • verz 0,20-0,50 mm² AWG 24-20
    For tinned wire ends within the cross sectional range stated

    (for the gauge or cross-sectional range indicated).

  • 1dräht 0,20-0,75 mm²
    For solid conductors

    (for the gauge or cross-sectional range indicated).

Facebook Icon LinkedIn Icon
Optimized "pick and place" area Optimized design for reduced shadowing No tools required! Wires... more
Product information "SMD Push through terminal block - 1 pole with cover"
Optimized "pick and place" area
Optimized design for reduced shadowing
No tools required! Wires can be released by twisting and pulling the wire simultaneously.
Terminal block and ballast on same working level
Note 1: Maximum thickness of PCB and heatsink should not exceed 3.6 mm
Note 2: Recommendation for opening in heatsink is shown with minimum diameter. For other shaped pockets in heatsink the minimum creepage and clearance distances and manufacturing tolerances have to be considered.
Note 3: Recommended dimension for opening in PCB
Note 4: Recommended dimension for solder mask
Note 5: The minimum creepage distance has to be guaranteed, depends on the application.
Note 6: Recommended pick & place area #1
Note 7: Recommended pick & place area #2 inside of the connector. Max. diameter of nozzle is 2.5 mm.
Note 8: Distance from center of mass to pick and place area #1 and #2
General note: It is recommended to make an electrical connection between both poles of each polarity on the solder mask
Other packaging units on request
Product name: SMD Push through terminal block - 1 pole with cover
Short description: Also without cover available
Mounting method 1: Solder fixing
Material: Housing: PPA Contacts: Cu alloy
ENEC Rating: 9A / 500V (EN 60947-7-4) - 0.2-0.75 mm² 9A / 500V (EN 60598-1) - 0.2-0.75 mm² , pitch min. 6.25 mm
[URus Rating]: 9A / 600V (UL 1977), 24 - 18 AWG
Wiring: from below the PCB
Approval: IEC 60947-7-4, additional cURus
cULus file no.: E-365006
Quantity of poles: 1
Pkg.: 9800
Available information


The fields marked with * are required.

Certifications
Artikel-Nr Status Beschreibung Dokument
46.151.2001.50 ENEC Approval VDE Download PDF file
46.151.2001.50 cURus (USA and Kanada) UL Download PDF file
Web Foto Standard 1 Gasket 77.705.-711.00
NEW
Viewed
QUALITY & SAFETY
At BJB, we take pride in making quality
a habit in everything we do. That's why
our name name has been synonymous with
quality since 1867.
INNOVATION
Our engineers are experts in their fields,
and 'second best' is not part of their vocabulary.
INTERNATIONALITY
BJB speaks many languages,
namely those of our customers.