SMD-Terminal block - Nano with push wire contacts and contact opening function, 2 pole 46.142.1001.50
- Part no.: 46.142.1001.50
- Package: 50400
- Rated impulse voltage
Rated impulse voltage (Uimp) indicates the peak value, to which the component can be used without failure.
SMD terminal block
- Single pushwire terminals
- 7.0 +/- 0.5 mm Stripped length
Stripped length in mm
- 0.20-0.50 mm² AWG 24-20 For solid conductors
(for the gauge or cross-sectional range indicated).
Product information "SMD-Terminal block - Nano with push wire contacts and contact opening function, 2 pole"
Direct insertion of solid wires
Contact opening funticon - for release of already inserted wires
Mounting and wiring position: PCB top side
Machine-compatible "tape-and-reel" packaging
Fixing: Lead-free reflow soldering according to DIN EN 610760-1, section 6
It is recommended to make an electrical connection between both poles of each polarity on the solder mask
To operate the contact opening function, we recommend the use of our tool 46.141.U801.89
For further technical data, please refer to the technical data sheet under menu item downloads.
Instructions for soldering process
Suitable for leadfree-reflow-profiles according to DIN EN 61760-1 respective DIN EN 60068-2-58 up to peak-temperature of max. 260°C. Due to different application-specific parameters (component arrangement and alignment, soldering system, solder paste), it is recommended to use test runs to determine a suitable profile under production conditions. Depending on the SMD soldering process and associated parameters a minor discoloration might occur. However, this will not influence the functionality.
|Product name:||SMD-Terminal block - Nano with push wire contacts and contact opening function, 2 pole|
|Mounting method 1:||Solder fixing|
|Material:||Housing: PPA, white Contact material: CuNi Contact surface: hot-dip tinned 5-10 µm|
|ENEC Rating:||3A / 320V|
|Approval:||IEC 60947-1, additional cURus|
|cULus file no.:||E-365006|
|Quantity of poles:||2|