Subscribe now and stay informed about new products and offers.
Privacy *
Here you can find our data protection information.

Product added to compare

SMD Push through terminal block - Slim

Product information "SMD Push through terminal block - Slim"

Direct insertion of solid and stranded, tinned wire ends

Wires can be released by twisting and pulling the wire simultaneously.

Mounting and wiring position: PCB bottom side

Ballast and PCB terminal block on one level

Machine-compatible "tape-and-reel" packaging

Fixing: Lead-free reflow soldering according to DIN EN 610760-1, section 6

It is recommended to make an electrical connection between both poles of each polarity on the solder mask

For further technical data, please refer to the technical data sheet under menu item downloads.

Instructions for soldering process
Suitable for leadfree-reflow-profiles according to DIN EN 61760-1 respective DIN EN 60068-2-58 up to peak-temperature of max. 260°C. Due to different application-specific parameters (component arrangement and alignment, soldering system, solder paste), it is recommended to use test runs to determine a suitable profile under production conditions. Depending on the SMD soldering process and associated parameters a minor discoloration might occur. However, this will not influence the functionality.

Color: white
Conductor cross-section: Eindrähtige Leiter / Solid wires: 0.2 - 0.75 mm², AWG 24-18; Feindrähtige, verzinnte Leiter / Stranded, tinned wires: 0.2 - 0.5 mm², AWG 24-20
Connector: Plug-in contact
Country of origin: DE
Height: 7,4 mm / 0.295 inch
Height (build in): 7.5 mm
Length: 21.7 mm / 0.85 inch
Material: Housing: PPA, white; Contact material: CuNiSiP; Contact surface: hot-dip tinned
Note warranty conditions: *Warranty conditions of BJB GmbH & Co. KG as stated as available via the Internet under are valid.
Number of poles: 1
Packaging quantity: 9500
Producttype: PushThrough SMD Terminal Blocks
Series: SMD Terminal Blocks for rear side wiring
Temperature rating: Ambient temperature from -40°C to 125°C
Type of packaging: Blister belt
Weight: 0,5 g
Width: 3.95 mm / 0.155 inch
Wiring: PCB bottom side
mounting method 1: Solder fixing


Article Number Status Description Documents
46.111.1001.50 cURus,_gültig_für_USA_und_Kanada-cURus_(USA_and_Kanada)4268179
46.111.1001.50 ENEC_Zeichen-ENEC_Approval4628953
  • 8.0 + 1 mm

  • 0.2 -0.75 mm² AWG 24 - 18