Fluorescent lampholder G13 26.422.1210.50
- Part no.: 26.422.1210.50
- Weight: 6 g
- Package: 500
- Color: white
- Color code: 50
- Temperature rating
The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the component is designed. Additional information may be given for the rear of the component (i.e.. Tm 110° C). For UL temperature marks, contact BJB.
Rated voltage 500V for the application with electronic mains ballasts having an output voltage Uout up to 500V.
- Airpass Rotor
Air-Pass Rotors are manufactured from a highly heat resistant material. The Air-Pass Rotor also provides point contact with the lamp cap, creating an air gap between the face of the lampholder and the lamp cap. (minimizing thermal convection and maximizing heat dissipation) resulting in the lampholder operating at a lower temperature. This simple but effective rotor system has proven itself over more than a decade in millions of applicat
- Top Test - for efficient final testing of lighting fixtures
Our trademark "Top Test" refers to two test ports located in the top of the lampholder. The electrodes of the Top Test adaptor are inserted here to connect with the internal contacts of the lampholder, allowing a fast final circuit test without the need for test lamp insertion and removal.
- Front Test - for efficient final testing of lighting fixtures.
In principal this method is the same as Top Test, except that the adapter electrodes are inserted into the rotor from the front.
- Twin push wire terminals
- 18 AWG 0,5 -1,0 mm² For solid conductors
(for the gauge or cross-sectional range indicated).
- 90° rotor lock