Product added to compare

LED oven lamp Spot

Product information "LED oven lamp Spot"

Tiltable LED oven lamp with light conducting glass rod

Symmetrical light characteristic

Screw fixing: for M3 screws
alternatively: push in fixing by using the P2F fixing element 28.905

• Due to the variable length of the light conducting glass rod, different installation heights in the oven are possible.
• Variable LED parameters (CCT, CRI, number)
• Protection class III due to operation on SELV voltage
• Max. possible current of the lamp is to be determined in the most unfavorable operating condition
• The choice of our products, as well as the technically correct installation according to the relevant regulations (e.g. IEC 62031 and IEC60335) , are the sole responsibility of the user.

Special versions with higher requirements such as steam tightness, with microwave shielding or pyrolysis suitability on request.

Application areas: Home + Professional
Ausführung: Dimmable with suitable control gear
Colour temperature: 3.500 K
Durability: Average life time (L70 / B50) = 5.000 h (according to BJB test requirements)
Lamp: LED
Luminous flux Ta25° C If typical: 190 lm
Material: Heat sink: Aluminium, anodized; Housing: PET; Glass light guide rod: Borosilicate glass
Max. Temperature at Tc point: 110° C
Note on electrical and optical tolerances: Tolerances of optical and electrical data: ±10 %.
Note warranty conditions: *Warranty conditions of BJB GmbH & Co. KG as stated as available via the Internet under are valid.
Operating current: 1.000 mA
Operating mode: Constant current
Other: Output: 3.0 W - Luminous flux @Ta25° C @ If typical: 190 lm
Output: 3.0 W
Packaging quantity: 54
Producttype: LED Oven Lamp
Series: LED
Suitable for: Combined ovens - Microwaves - Pyro - Steam
number of LEDs per module: 1


Article Number Status Description Documents
77.115.2001.00 ENEC_Zeichen-ENEC_Approval5772810
  • 0,5 - 1,0

  • 0,5 - 1,0


Seal for glass rod with D=10 and D=12mm