Set'n'Drive 3.0 kOhm parameterising resistor (S'n'D)
Article number:
47.901.1008-0
EAN:
-
Product information "Set'n'Drive 3.0 kOhm parameterising resistor (S'n'D)"
Product details:
- Resistance: see chart
- Contact protection against accidental contact
- Simple, manual hand assembly
- Rast 3.5 mm - Suitable for all standard ballasts
- Clearances and creepage distances according to IEC
- Resistance values according to LEDset1
Specification of MD-SIG
(Module Driver Special Interest Group under ZHAGA) - The most economical way for parameterisation
- No complicated and expensive pre-assembly of the resistors
Electronic control gear can also be parameterised by the insertion of a resistor on the secondary side.
To make this method as easy as possible, we have developed the Set’n’Drive resistor.
The resistor - already integrated into a housing - is protected against contact and is quick and easily inserted into the terminal block of the electronic control gear.
Push in - Ready.
| Color: | white |
|---|---|
| Note warranty conditions: | *Warranty conditions of BJB GmbH & Co. KG as stated as available via the Internet under https://www.bjb.com/en/legal-information/general-terms-and-conditions/ are valid. |
| Packaging quantity: | 600 |
| Producttype: | Set'n'Drive - Parameterising resistor for ECGs |
| Resistance: | 3.0 kOhm - 1667 LEDset in mA - 941 Rset2 in mA |
| Series: | Resistor for LED Modules |
| Weight: | 2 g |
| old article number: | 47.901.1008.50 |
Available CAD Downloads
Certifications
| Article Number | Status | Description | Documents |
|---|