COB connector Ø 44 mm for LED array 20 x 24 mm

47.360.5080.50

PDF

Part no.: 47.360.5080.50
Weight: 4 g
Package: 378
Color: white

LED-c-Line
LED Connector
Temperature rating
The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the lampholder is designed. Additional information may be given for the rear of the lampholder (i.e.. Tm 110° C). For UL temperature marks, contact BJB.
Single pushwire terminals
8.0 + 1 mm

Stripped length
Stripped length in mm
0,35-0,5 mm²

For tinned wire ends within the cross sectional range stated
(for the gauge or cross-sectional range indicated).
0.35-0.5 mm²

For solid conductors
(for the gauge or cross-sectional range indicated).

Any questions?

With integrated COB holder and interface for reflectors 47.940 Easy pre-assembly of LED Screw... more

Close menu

Product information "COB connector Ø 44 mm for LED array 20 x 24 mm"

With integrated COB holder and interface for reflectors 47.940
Easy pre-assembly of LED
Screw mounting: for screws M3 and locking washer
Max. torque for screw fixing 0.5 Nm*
Strip length: 8+1 mm
Polarity symbols of connector and LED must be observed in assembly
Specification of LED manufacturer must be observed
In a series connection of LED modules, the air gap and creepage distances has to be sized that each module covers the total voltage of the series connection
*Please note the max torque of the COB manufacturer

Product name:	COB connector Ø 44 mm for LED array 20 x 24 mm
Mounting method 1:	Screw mount
Mounting method 2:	P2F fixing with 28.902.-102
Prefixation of COB:	Yes
Material:	Housing: PBT Contacts: CuSn
LED manufacturer:	Philips, LUMILEDS
LED Typ:	COB 1204/1205/1208, Fortimo SLM 1205/1208
Conductor cross-section:	0.35-0.5 mm²
Rating:	Rating: 3A / 150 VDC
Weight:	4
Pkg.:	378