COB connector Ø 44 mm for LED array 19 x 19 mm 47.360.5010.50

PDF

Part no.: 47.360.5010.50
Package: 540

LED-c-Line
LED Connector
Temperature rating
The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the lampholder is designed. Additional information may be given for the rear of the lampholder (i.e.. Tm 110° C). For UL temperature marks, contact BJB.
Single pushwire terminals
8.0 + 1 mm

Stripped length
Stripped length in mm
0,35-0,5 mm²

For tinned wire ends within the cross sectional range stated
(for the gauge or cross-sectional range indicated).
0.35-0.5 mm²

For solid conductors
(for the gauge or cross-sectional range indicated).

Any questions?

With integrated COB holder and interface for reflectors 47.940 Easy pre-assembly of LED Screw... more

Close menu

Product information "COB connector Ø 44 mm for LED array 19 x 19 mm"

With integrated COB holder and interface for reflectors 47.940
Easy pre-assembly of LED
Screw mounting: for screws M3 and locking washer
Max. torque for screw fixing 0.5 Nm*
Strip length: 8+1 mm
Polarity symbols of connector and LED must be observed in assembly
Specification of LED manufacturer must be observed
In a series connection of LED modules, the air gap and creepage distances has to be sized that each module covers the total voltage of the series connection
*Please note the max torque of the COB manufacturer

Product name:	COB connector Ø 44 mm for LED array 19 x 19 mm
Mounting method 1:	Screw mount
Mounting method 2:	P2F fixing with 28.902.-102
Mounting method 3:	Tip for fastening by screws: The screw chamber of the 47.360 series has a height of 1.9 mm. The screw head must not be higher, otherwise the reflector will fit poorly or not at all.
Prefixation of COB:	Yes
Material:	Housing: PBT Contacts: CuSn
LED manufacturer:	Everlight, OSRAM Opto Semiconductors, Tridonic, Bridgelux, Sunpu, Seoul Semiconductor, Samsung, Prolight Opto, Vossloh-Schwabe, Liteon, Xicato, LEDtech, Itswell, Edison, Citizen
LED Typ:	SLE G1 LES 11 / LES 15, SLE G6 LES 17, V13 - Gen. 7, Opto 30W, Xuan1919, LP30N3-84N-B131299, M045, Soleriq S13 - 19x19 mm, PACB 032/PACF 57, LC016D / 19D / 26D / 33D, SLE G6/G7 LES 15, DMC 114/118/125/128, VS DMS099, DMS 125/126/128, G17, SAW815xxA / SAW915xxA, DMC 115C40E, COB-N series, CLU03X / 712 / 72X, LES 14.5 (19 x 19 x 0.9 mm), LC030C / LC040C, LC020C, ZC12/18
Conductor cross-section:	0.35-0.5 mm²
Rating:	Rating: 3A / 150 VDC
Pkg.:	540

Suitable for the following LED models:

LED Manufacturer	LED Type	More Information
Bridgelux	V13 - Gen. 7	http://www.bridgelux.com
Citizen	CLU03X / 712 / 72X	http://ce.citizen.co.jp
Edison	Opto 30W	http://www.edison-opto.com.tw
Everlight	Xuan1919	http://www.everlight.com
Itswell	COB-N series	http://www.itswell.com
LEDtech	LP30N3-84N-B131299	http://www.ledtech.com.tw
Liteon	M045	http://optoelectronics.liteon.com
OSRAM Opto Semiconductors	Soleriq S13 - 19x19 mm	http://www.osram-os.com
Prolight Opto	PACB 032/PACF 57	http://www.prolightopto.com
Samsung	LC020C	http://www.samsung.com
Samsung	LC030C / LC040C	http://www.samsung.com
Samsung	LC016D / 19D / 26D / 33D	http://www.samsung.com
Seoul Semiconductor	ZC12/18	http://www.seoulsemicon.com
Seoul Semiconductor	SAW815xxA / SAW915xxA	http://www.seoulsemicon.com
Sunpu	G17	http://www.sunpuled.com
Tridonic	SLE G6 LES 17	http://www.tridonic.com
Tridonic	SLE G1 LES 11 / LES 15	http://www.tridonic.com
Tridonic	SLE G6/G7 LES 15	http://www.tridonic.com
Vossloh-Schwabe	DMC 114/118/125/128	http://www.vossloh-schwabe.com
Vossloh-Schwabe	DMC 115C40E	http://www.vossloh-schwabe.com
Vossloh-Schwabe	VS DMS099	http://www.vossloh-schwabe.com
Vossloh-Schwabe	DMS 125/126/128	http://www.vossloh-schwabe.com
Xicato	LES 14.5 (19 x 19 x 0.9 mm)	https://www.xicato.com/