Connector for COBs 47.316.3001.50

PDF

Part no.: 47.316.3001.50
Weight: 2 g
Package: 280

LED-c-Line
LED Connector
Temperature rating
The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the lampholder is designed. Additional information may be given for the rear of the lampholder (i.e.. Tm 110° C). For UL temperature marks, contact BJB.
Single pushwire terminals
20 AWG

For tinned wire ends within the cross sectional range stated
(for the gauge or cross-sectional range indicated).
20 AWG

For solid conductors
(for the gauge or cross-sectional range indicated).

Any questions?

Screw mounting: for screws M3 and locking washer Max. torque for screw fixing 0.5 Nm* Strip... more

Close menu

Product information "Connector for COBs"

Screw mounting: for screws M3 and locking washer
Max. torque for screw fixing 0.5 Nm*
Strip length: 6+1 mm
Polarity of LED must be observed
Specifications of LED manufacturer must be observed
VDE-Reg. No. D971
*Please note the max torque of the COB manufacturer

Product name:	Connector for COBs
Mounting method 1:	Screw mount
Prefixation of COB:	No
Material:	Housing: PBT Contacts: CuSn
LED manufacturer:	LUMILEDS, Nichia
LED Typ:	COB 1202/1203, NSBWL110/NSBLL110, NFCWL072B-V2
Conductor cross-section:	0.75 mm²
Approval:	cURus
cULus file no.:	E-345385
Suitable for:	NSBWL110, NSBLL110 and NFCWL072B-V2 from Nichia and LUXEON CoB 1202/1203 from Lumileds
Rating:	Rating: 3A / 300 VDC
Weight:	2
Pkg.:	280