26.620.2012

Linear Fluorescent Lampholders: General Applications
G5 (T5): Push-Through Lampholders

26.620.2012
L1-1 / L1-6: Recommended cutout spacing. "L1" distance is determined by the length of the respective lamp.

FC:

color:

Sample Request
  • white
  • 50
  • 26.620.2012.50
  • 3
  • Housing: PC Rotor: PBT
  • 1000
  • Airpass Rotor
    Air-Pass Rotors are manufactured from a highly heat resistant material. The Air-Pass Rotor also provides point contact with the lamp cap, creating an air gap between the face of the lampholder and the lamp cap. (minimizing thermal convection and maximizin
  • Twin push wire terminals
  • Top Test - for efficient final testing of lighting fixtures
    Our trade mark "Top Test" refers to two test ports located in the top of the lampholder. The electrodes of the Top Test adaptor are inserted here to connect with the internal contacts of the lampholder, allowing a fast final circuit test without the need
  • Front Test - for efficient final testing of lighting fixtures.
    In principal this method is the same as Top Test, except that the adapter electrodes are inserted into the rotor from the front.
  • Temperature rating
    The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the lampholder is designed. Additional information may be given for the rear of the lampholder (i.e.. Tm 110° C). F
  • 0,5 - 1,0 mm²
    For solid conductors
    (for the gauge or cross-sectional range indicated).
  • 0,5 - 1,5
    Mounting material thickness (in mm)
  • Temperature rating
    This is the maximum operating temperature for the rear of the lampholder.
For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance...more
Product information "26.620.2012"

Description

  • For enclosed cut-outs: 10 x 20 mm
  • A pair of lampholders provides a lamp length tolerance compensation of 2 mm
  • Symbol 1drähtige Leitungen: 0,5 - 1,0 mm²
  • Farbe: white
  • Mounting method 1: Snap-in / screw mount foot
  • Material: Housing: PC Rotor: PBT
  • Rotor: with
  • cULus file no.: E-92235
  • Weight: 3
  • Approval: cULus
  • Front Test: yes
  • Lamp center: 25 / 27.5
  • Material thickness: 0,3 - 1,2
  • T-Marking: 140
  • Top Test: yes
  • Pkg.: 1000

Certifications for 26.620.2012.50

Part no. Status Description Document
26.620.2012 Approval at hand CQC download pdf
26.620.2012 ENEC Approval VDE download pdf
26.620.2012 Approval at hand TISI download pdf
26.620.2012 Approval at hand EAC download pdf
26.620.2012 Approval at hand IRAM download pdf
26.620.2012 cULus (USA and Kanada) UL download pdf

SAMPLE ORDER

Your delivery address
You are*
Country**
Salutation*
First name*
Surname*
Company*
Street and number*
State / Additional address line
Postal / Zip Code*
City*
Phone
The fields marked with * are required
Available information:

Similar products

26.613.1001
 

26.613.1001.50

 

26.613.1001.50

  • Product description

    • weiß
    • 3
    • Housing: PC
    • 1000
    26.613.1001.50
  • Properties

    • Without rotor
    • G5
    • 0,5 - 1,0 mm²
    • white
    • Snap-in / screw mount foot
  • Product information

    For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.2001
 

26.620.2001.50

 

26.620.2001.50

  • Product description

    • weiß
    • 3
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2001.50
  • Properties

    • G5
    • 0,5 - 1,0 mm²
    • white
    • Snap-in / screw mount foot
    • Leuchtstofflampen
  • Product information

    For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.2003
 

26.620.2003.50

 

26.620.2003.50

  • Product description

    • weiß
    • 3
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2003.50
  • Properties

    • G5
    • 0,5 - 1,0 mm²
    • white
    • Push through mount
    • Leuchtstofflampen
  • Product information

    For cut-outs open at the rear: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.2004
 

26.620.2004.50

 

26.620.2004.50

  • Product description

    • weiß
    • 3
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2004.50
  • Properties

    • G5
    • 0,5 - 1,0 mm²
    • white
    • Push through mount
    • Leuchtstofflampen
  • Product information

    For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.2005
 

26.620.2005.50

 

26.620.2005.50

  • Product description

    • weiß
    • 3
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2005.50
  • Properties

    • G5
    • 0,5 - 1,0 mm²
    • white
    • Push through mount
    • Leuchtstofflampen
  • Product information

    For cut-outs open at the rear: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.2006
 

26.620.2006.50

 

26.620.2006.50

  • Product description

    • weiß
    • 3
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2006.50
  • Properties

    • G5
    • 0,5 - 1,0 mm²
    • white
    • Push through mount
    • Leuchtstofflampen
  • Product information

    For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.2012
 

26.620.2012.50

 

26.620.2012.50

  • Product description

    • weiß
    • 3
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2012.50
  • Properties

    • G5
    • 0,5 - 1,0 mm²
    • white
    • Snap-in / screw mount foot
    • Leuchtstofflampen
  • Product information

    For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.2017
 

26.620.2017.50

 

26.620.2017.50

  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2017.50
  • Properties

    • G5
    • 0,5 - 1,0 mm²
    • white
    • Snap-in / screw mount foot
    • Leuchtstofflampen
  • Product information

    For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.2018.50
Lampholder

26.620.2018.50

Lampholder

26.620.2018.50

  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2018.50
  • Properties

    • Lampholder
    • white
    • 54W/8.., Bonalux G5, F049W/965, F14W/T5/8.., F14W/T5/865, F21W/T5/8.., F21W/T5/865, F24W/T5/8.., F24W/T5/865, F28W/T5/8.., F28W/T5/865, F35W/T5/8.., F35W/T5/865, F39W/T5/8.., F39W/T5/865, F49W/T5/8.., F49W/T5/865, F54W/T5/8.., F54W/T5/865, F80W/T5/8.., F80W/T5/865, FH0 24W/8.., FH0 39W/8.., FH024W/860, FH039W/860, FH049W/8.., FH049W/860, FH054W/8.., FH054W/860, FH14W/8.., FH14W/860, FH21W/8.., FH21W860, FH28W/8.., FH28W/860, FH35W/8.., FH35W/860, FHE 21W/8.., FHE 28W/8.., FHE14W/860, FHE14W8.., FHE21W/860, FHE28W/860, FHE35W/8.., FHE35W/860, FQ24W/8.., FQ24W/860, FQ24W/940, FQ24W/965, FQ39W/8.., FQ39W/860, FQ49W/940, FQ54W/860, FQ54W/940, FQ54W/965, FQ80W/8.., FQ80W/860, FQ80W/965, G5, LUMILUX T5, Master TL5, Spectralux G5, Standard G5, Starcoat T5, T5 FHE, T5 FHO, T5 Polylux, T5 Standard, TL5 HO 24W/940, TL5 HO 54W/940, TL5 HO 54W/965, TL5H024W/8.., TL5H024W/965, TL5H039W/8.., TL5H049W/8.., TL5H049W/865, TL5H049W/940, TL5H049W/965, TL5H054W/8.., TL5H080W/8.., TL5H080W/865, TL5HE14W/8.., TL5HE21W/8.., TL5HE28W/8.., TL5HE35W/8.., TL5HE35W/865
    • GE Lighting, Osram, Philips, Radium, Sylvania
    • Leuchtstofflampen
  • Product information

    For cut-outs open at the rear or enclosed cut-out with 3.7 mm dia. locating hole A pair of lampholders provides a...
    • Lampholder
26.620.2103.50
Lampholder

26.620.2103.50

Lampholder

26.620.2103.50

  • Product description

    • weiß
    • 3
    • Housing: PC Rotor: PBT
    • 1000
    26.620.2103.50
  • Properties

    • Lampholder
    • white
    • Push through mount
  • Product information

    For cut-outs open at the rear: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
    • Lampholder
26.620.3012
 

26.620.3012.51

 

26.620.3012.51

  • Product description

    • weiß
    • 3
    • Housing: PBT Rotor: PBT
    • 1000
    26.620.3012.51
  • Properties

    • 0,5 - 1,0 mm²
    • white
    • Snap-in / screw mount foot
    • 0,3 - 1,2
  • Product information

    For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
26.620.3014
 

26.620.3014.51

 

26.620.3014.51

  • Product description

    • weiß
    • 3
    • Housing: PBT Rotor: PBT
    • 1000
    26.620.3014.51
  • Properties

    • 0,5 - 1,0 mm²
    • white
    • Push through mount
    • 0.5 - 1.5
  • Product information

    For enclosed cut-outs: 10 x 20 mm A pair of lampholders provides a lamp length tolerance compensation of 2 mm
Last viewed
Sprache auswählen
Deutsch
English