26.306.1018

Linear Fluorescent Lampholders: General Applications
G13 (Medium Bi-Pin): Push-In Lampholders

26.306.1018
L1-7: Recommended cutout spacing . "L1" distance is determined by the length of the respective lamp.

color:

Sample Request
  • white
  • 50
  • 26.306.1018.50
  • 4
  • 500
  • Twin push wire terminals
  • Airpass Rotor
    Air-Pass Rotors are manufactured from a highly heat resistant material. The Air-Pass Rotor also provides point contact with the lamp cap, creating an air gap between the face of the lampholder and the lamp cap. (minimizing thermal convection and maximizin
  • Top Test - for efficient final testing of lighting fixtures
    Our trade mark "Top Test" refers to two test ports located in the top of the lampholder. The electrodes of the Top Test adaptor are inserted here to connect with the internal contacts of the lampholder, allowing a fast final circuit test without the need
  • Front Test - for efficient final testing of lighting fixtures.
    In principal this method is the same as Top Test, except that the adapter electrodes are inserted into the rotor from the front.
  • 90° rotor lock
  • Temperature rating
    The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the lampholder is designed. Additional information may be given for the rear of the lampholder (i.e.. Tm 110° C). F
  • 0,5 - 1,1
    Mounting material thickness (in mm)
  • 18 AWG
    0,5 -1,0 mm²
    For solid conductors
    (for the gauge or cross-sectional range indicated).
  • Temperature rating
    This is the maximum operating temperature for the rear of the lampholder.
  • Rating
    Rated voltage 500V for the application with electronic mains ballasts having an output voltage Uout up to 500V.
Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp...more
Product information "26.306.1018"

Description

  • Can be wired from above or below the mounting plate.
  • A pair of lampholders provides a lamp length tolerance compensation of 3 mm
  • Property label Product name: Fluorescent lampholder G13
  • Property label Farbe: white
  • Property label Material: Housing: PC Rotor: PBT
  • Property label Symbol value: 18 AWG 0.5 - 1.0 mm²
  • Property label Mounting method 1: Snap-in foot 10 x 20 mm
  • Property label Rotor: with
  • Property label cULus file no.: E-92235
  • Property label Weight: 4
  • Property label Approval: cULus
  • Property label Front Test: yes
  • Property label Lamp center: 18
  • Property label Material thickness: 0.5 - 1.1
  • Property label T-Marking: 130
  • Property label Top Test: yes
  • Property label Wiring: through snap in foot
  • Property label Pkg.: 500

Certifications for 26.306.1018.50

Part no. Status Description Document
26.306.1018 PSE-Mark JET download pdf
26.306.1018 Approval at hand NOM download pdf
26.306.1018 Approval at hand EAC download pdf
26.306.1018 cULus (USA and Kanada) UL download pdf
26.306.1018 Approval at hand CQC download pdf
26.306.1018 Approval at hand IRAM download pdf
26.306.1018 ENEC Approval VDE download pdf

SAMPLE ORDER

Your delivery address
You are*
Country**
Salutation*
First name*
Surname*
Company*
Street and number*
State / Additional address line
Postal / Zip Code*
City*
Phone
The fields marked with * are required
Available information:

Similar products

  • Product description

    • weiß
    • 4
    • Housing: PC Rotor: PBT
    • 500
    26.306.1018.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 10 x 20 mm
    • Housing: PC Rotor: PBT
  • Product information

    Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp length tolerance...
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 500
    26.306.1025.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 10 x 20 mm
    • Housing: PC Rotor: PBT
  • Product information

    Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp length tolerance...
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 500
    26.306.1118.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • Housing: PC Rotor: PBT
  • Product information

    A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 500
    26.306.1125.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • Housing: PC Rotor: PBT
  • Product information

    A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 8
    • Housing: PC Rotor: PBT
    • 500
    26.306.5025.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 10 x 20 mm
    • Housing: PC Rotor: PBT
  • Product information

    A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 7
    • Housing: PC Rotor: PBT
    • 500
    26.306.5125.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • Housing: PC Rotor: PBT
  • Product information

    A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.307.1023.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Housing: PC Rotor: PBT
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 8
    • Housing: PC Rotor: PBT
    • 500
    26.307.1030.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Housing: PC Rotor: PBT
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 9
    • Housing: PC Rotor: PBT
    • 500
    26.307.5023.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Housing: PC Rotor: PBT
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 11
    • Housing: PC Rotor: PBT
    • 500
    26.307.5030.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Housing: PC Rotor: PBT
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 8
    • Housing: PC Rotor: PBT
    • 500
    26.307.6023.51
  • Properties

    • Instant
    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm Instantstart...
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.308.1018.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 10 x 20 mm
    • Housing: PC Rotor: PBT
  • Product information

    With snap in foot and closed base, IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
Last viewed
Sprache auswählen
Deutsch
English