26.308.1125

Linear Fluorescent Lampholders: General Applications
G13 (Medium Bi-Pin): Push-In Lampholders

26.308.1125
L1 - 4: Maßempfehlung - Abstand und Toleranz sind den jeweiligen Maßverhältnissen der Lampen und Leuchten anzupassen.

FC:

color:

Sample Request
  • white
  • 50
  • 26.308.1125.50
  • 6
  • Housing: PC Rotor: PBT
  • 500
  • Rating
    Rated voltage 500V for the application with electronic mains ballasts having an output voltage Uout up to 500V.
  • Airpass Rotor
    Air-Pass Rotors are manufactured from a highly heat resistant material. The Air-Pass Rotor also provides point contact with the lamp cap, creating an air gap between the face of the lampholder and the lamp cap. (minimizing thermal convection and maximizin
  • Temperature rating
    The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the lampholder is designed. Additional information may be given for the rear of the lampholder (i.e.. Tm 110° C). F
  • Temperature rating
    This is the maximum operating temperature for the rear of the lampholder.
  • Twin push wire terminals
  • Top Test - for efficient final testing of lighting fixtures
    Our trade mark "Top Test" refers to two test ports located in the top of the lampholder. The electrodes of the Top Test adaptor are inserted here to connect with the internal contacts of the lampholder, allowing a fast final circuit test without the need
  • Front Test - for efficient final testing of lighting fixtures.
    In principal this method is the same as Top Test, except that the adapter electrodes are inserted into the rotor from the front.
  • 0,5 - 1,1
    Mounting material thickness (in mm)
  • 18 AWG
    0,5 -1,0 mm²
    For solid conductors
    (for the gauge or cross-sectional range indicated).
With snap in foot and closed base, IP 40. With foot gasket IP 50. A pair of lampholders...more
Product information "26.308.1125"

Description

  • With snap in foot and closed base, IP 40. With foot gasket IP 50.
  • A pair of lampholders provides a lamp length tolerance compensation of 3 mm
  • Symbol 1drähtige Leitungen: 0,5-1,0 mm²
  • Farbe: white
  • Mounting method 1: Snap-in foot 25.5 x 13.3 mm
  • Material: Housing: PC Rotor: PBT
  • Rotor: with
  • cULus file no.: E-92235
  • Weight: 6
  • Approval: cULus
  • Front Test: yes
  • Lamp center: 25
  • Material thickness: 0.5 - 1.1
  • Protection class according to IEC: IP 40
  • T-Marking: 130
  • Top Test: yes
  • Wiring: Side entry wiring
  • Pkg.: 500

Certifications for 26.308.1125.50

Part no. Status Description Document
26.308.1125.50 ENEC Approval VDE download pdf
26.308.1125.50 PSE-Mark JET download pdf
26.308.1125.50 Approval at hand IRAM download pdf
26.308.1125.50 cULus (USA and Kanada) UL download pdf
26.308.1125.50 Approval at hand EAC download pdf

SAMPLE ORDER

Your delivery address
You are*
Country**
Salutation*
First name*
Surname*
Company*
Street and number*
State / Additional address line
Postal / Zip Code*
City*
Phone
The fields marked with * are required
Available information:

Similar products

26.306.1018
 

26.306.1018.50

 

26.306.1018.50

  • Product description

    • weiß
    • 4
    • Housing: PC Rotor: PBT
    • 500
    26.306.1018.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • 0.5 - 1.1
    • through snap in foot
  • Product information

    Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp length tolerance...
26.306.1025
 

26.306.1025.50

 

26.306.1025.50

  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 500
    26.306.1025.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • 0.5 - 1.1
    • through snap in foot
  • Product information

    Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp length tolerance...
26.307.1023
 

26.307.1023.50

 

26.307.1023.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.307.1023.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • 0.5 - 1.1
    • through the body
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.307.5023
 

26.307.5023.50

 

26.307.5023.50

  • Product description

    • weiß
    • 9
    • Housing: PC Rotor: PBT
    • 500
    26.307.5023.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • 0.5 - 1.1
    • yes
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.308.1018
 

26.308.1018.50

 

26.308.1018.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.308.1018.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • 0.5 - 1.1
    • Side entry wiring
  • Product information

    With snap in foot and closed base, IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.308.1021
 

26.308.1021.50

 

26.308.1021.50

  • Product description

    • weiß
    • 7
    • Housing: PC Rotor: PBT
    • 500
    26.308.1021.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • 0.5 - 1.1
    • Side entry wiring
  • Product information

    With cable support With snap in foot and closed base, IP 40 A pair of lampholders provides a lamp length tolerance...
26.308.1025
 

26.308.1025.50

 

26.308.1025.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.308.1025.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • 0.5 - 1.1
    • Side entry wiring
  • Product information

    With snap in foot and closed base, IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.308.1118
 

26.308.1118.50

 

26.308.1118.50

  • Product description

    • weiß
    • 8
    • Housing: PC Rotor: PBT
    • 500
    26.308.1118.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • 0.5 - 1.1
    • Side entry wiring
  • Product information

    With snap in foot and closed base, IP 40. With foot gasket IP 50. A pair of lampholders provides a lamp length...
26.308.1125
 

26.308.1125.50

 

26.308.1125.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.308.1125.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • 0.5 - 1.1
    • Side entry wiring
  • Product information

    With snap in foot and closed base, IP 40. With foot gasket IP 50. A pair of lampholders provides a lamp length...
26.310.1123
 

26.310.1123.50

 

26.310.1123.50

  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 500
    26.310.1123.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • 0.5 - 1.1
    • Side entry wiring
  • Product information

    With cable support Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.310.1130
 

26.310.1130.50

 

26.310.1130.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.310.1130.50
  • Properties

    • 0,5-1,0 mm²
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • 0.5 - 1.1
    • Side entry wiring
  • Product information

    With cable support Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
Last viewed
Sprache auswählen
Deutsch
English