26.310.1130

Linear Fluorescent Lampholders: General Applications
G13 (Medium Bi-Pin): Push-In Lampholders

26.310.1130
L1-20: Recommended mounting hole pattern spacing . "L1" distance is determined by the length of the respective lamp.

FC:

color:

Sample Request
  • weiß
  • 50
  • 26.310.1130.50
  • 6
  • 500
  • Twin push wire terminals
  • Airpass Rotor
    Air-Pass Rotors are manufactured from a highly heat resistant material. The Air-Pass Rotor also provides point contact with the lamp cap, creating an air gap between the face of the lampholder and the lamp cap. (minimizing thermal convection and maximizin
  • Top Test - for efficient final testing of lighting fixtures
    Our trade mark "Top Test" refers to two test ports located in the top of the lampholder. The electrodes of the Top Test adaptor are inserted here to connect with the internal contacts of the lampholder, allowing a fast final circuit test without the need
  • Front Test - for efficient final testing of lighting fixtures.
    In principal this method is the same as Top Test, except that the adapter electrodes are inserted into the rotor from the front.
  • 90° rotor lock
  • Temperature rating
    The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the lampholder is designed. Additional information may be given for the rear of the lampholder (i.e.. Tm 110° C). F
  • 0,5 - 1,1
    Mounting material thickness (in mm)
  • 18 AWG
    0,5 -1,0 mm²
    For solid conductors
    (for the gauge or cross-sectional range indicated).
  • Temperature rating
    This is the maximum operating temperature for the rear of the lampholder.
  • Rating
    Rated voltage 500V for the application with electronic mains ballasts having an output voltage Uout up to 500V.
With cable support Snap in pins for IP 40 A pair of lampholders provides a lamp length...more
Product information "26.310.1130"

Description

  • With cable support
  • Snap in pins for IP 40
  • A pair of lampholders provides a lamp length tolerance compensation of 3 mm
  • Product name: Fluorescent lampholder G13
  • Color: white
  • Mounting method 1: Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
  • Rotor: with
  • cULus file no.: E-92235
  • Weight: 6
  • Approval: cULus
  • Front Test: yes
  • Lamp center: 31
  • Material thickness: 0.5 - 1.1
  • Protection class according to IEC: IP 40
  • T-Marking: 130
  • Top Test: yes
  • Wiring: Side entry wiring
  • Pkg.: 500
Hersteller
LED Type
Weitere Informationen
Not Available
G13

Certifications for 26.310.1130.50

Part no. Status Description Document
26.310.1130 cULus (USA and Kanada) UL download pdf
26.310.1130 Approval at hand EAC download pdf
26.310.1130 PSE-Mark JET download pdf
26.310.1130 ENEC Approval VDE download pdf

SAMPLE ORDER

Your delivery address
You are*
Country**
Salutation*
First name*
Surname*
Company*
Street and number*
State / Additional address line
Postal / Zip Code*
City*
Phone
The fields marked with * are required
Available information:

Similar products

  • Product description

    • weiß
    • 4
    • 500
    26.306.1018.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp length tolerance...
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 5
    • 500
    26.306.1025.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp length tolerance...
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 5
    • 500
    26.306.1118.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • Leuchtstofflampen
  • Product information

    A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 5
    • 500
    26.306.1125.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • Leuchtstofflampen
  • Product information

    A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 8
    • 500
    26.306.5025.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 7
    • 500
    26.306.5125.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • Leuchtstofflampen
  • Product information

    A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 6
    • 500
    26.307.1023.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Leuchtstofflampen
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 8
    • 500
    26.307.1030.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Leuchtstofflampen
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 9
    • 500
    26.307.5023.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Leuchtstofflampen
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 11
    • 500
    26.307.5030.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Leuchtstofflampen
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 8
    • 500
    26.307.6023.51
  • Properties

    • Instant
    • Fluorescent lampholder G13
    • G13
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm Instantstart...
    • Fluorescent lampholder G13
  • Product description

    • weiß
    • 6
    • 500
    26.308.1018.50
  • Properties

    • Fluorescent lampholder G13
    • G13
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    With snap in foot and closed base, IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
    • Fluorescent lampholder G13
Last viewed
Sprache auswählen
Deutsch
English