26.307.1023

Linear Fluorescent Lampholders: General Applications
G13 (Medium Bi-Pin): Push-In Lampholders

26.307.1023
L1-20: Recommended mounting hole pattern spacing . "L1" distance is determined by the length of the respective lamp.

FC:

color:

Sample Request
  • white
  • 50
  • 26.307.1023.50
  • 6
  • Housing: PC Rotor: PBT
  • 500
  • Airpass Rotor
    Air-Pass Rotors are manufactured from a highly heat resistant material. The Air-Pass Rotor also provides point contact with the lamp cap, creating an air gap between the face of the lampholder and the lamp cap. (minimizing thermal convection and maximizin
  • Twin push wire terminals
  • Top Test - for efficient final testing of lighting fixtures
    Our trade mark "Top Test" refers to two test ports located in the top of the lampholder. The electrodes of the Top Test adaptor are inserted here to connect with the internal contacts of the lampholder, allowing a fast final circuit test without the need
  • Front Test - for efficient final testing of lighting fixtures.
    In principal this method is the same as Top Test, except that the adapter electrodes are inserted into the rotor from the front.
  • 90° rotor lock
  • Temperature rating
    The maximum operating temperature is given by a T marking according to IEC. This is the maximum continuous operating temperature for which the lampholder is designed. Additional information may be given for the rear of the lampholder (i.e.. Tm 110° C). F
  • 0,5 - 1,1
    Mounting material thickness (in mm)
  • 18 AWG
    0,5 -1,0 mm²
    For solid conductors
    (for the gauge or cross-sectional range indicated).
  • Temperature rating
    This is the maximum operating temperature for the rear of the lampholder.
  • Rating
    Rated voltage 500V for the application with electronic mains ballasts having an output voltage Uout up to 500V.
Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of...more
Product information "26.307.1023"

Description

  • Snap in pins for IP 40
  • A pair of lampholders provides a lamp length tolerance compensation of 3 mm
  • Symbol value: 18 AWG 0.5 - 1.0 mm²
  • Symbol 1drähtige Leitungen: 0,5-1,0 mm²
  • Farbe: white
  • Mounting method 1: Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
  • Material: Housing: PC Rotor: PBT
  • Rotor: with
  • cULus file no.: E-92235
  • Weight: 6
  • Approval: cULus
  • Front Test: yes
  • Lamp center: 24
  • Material thickness: 0.5 - 1.1
  • Protection class according to IEC: IP 40
  • T-Marking: 130
  • Top Test: yes
  • Wiring: through the body
  • Pkg.: 500

Certifications for 26.307.1023.50

Part no. Status Description Document
26.307.1023 Approval at hand EAC download pdf
26.307.1023 ENEC Approval VDE download pdf
26.307.1023 Approval at hand NOM download pdf
26.307.1023 Approval at hand CQC download pdf
26.307.1023 Approval at hand IRAM download pdf
26.307.1023 PSE-Mark JET download pdf
26.307.1023 cULus (USA and Kanada) UL download pdf

SAMPLE ORDER

Your delivery address
You are*
Country**
Salutation*
First name*
Surname*
Company*
Street and number*
State / Additional address line
Postal / Zip Code*
City*
Phone
The fields marked with * are required
Available information:

Similar products

26.306.1018
 

26.306.1018.50

 

26.306.1018.50

  • Product description

    • weiß
    • 4
    • Housing: PC Rotor: PBT
    • 500
    26.306.1018.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp length tolerance...
26.306.1025
 

26.306.1025.50

 

26.306.1025.50

  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 500
    26.306.1025.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    Can be wired from above or below the mounting plate. A pair of lampholders provides a lamp length tolerance...
26.307.1023
 

26.307.1023.50

 

26.307.1023.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.307.1023.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Leuchtstofflampen
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.307.5023
 

26.307.5023.50

 

26.307.5023.50

  • Product description

    • weiß
    • 9
    • Housing: PC Rotor: PBT
    • 500
    26.307.5023.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Leuchtstofflampen
  • Product information

    Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.308.1018
 

26.308.1018.50

 

26.308.1018.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.308.1018.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    With snap in foot and closed base, IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.308.1021
 

26.308.1021.50

 

26.308.1021.50

  • Product description

    • weiß
    • 7
    • Housing: PC Rotor: PBT
    • 500
    26.308.1021.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    With cable support With snap in foot and closed base, IP 40 A pair of lampholders provides a lamp length tolerance...
26.308.1025
 

26.308.1025.50

 

26.308.1025.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.308.1025.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Snap-in foot 10 x 20 mm
    • Leuchtstofflampen
  • Product information

    With snap in foot and closed base, IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.308.1118
 

26.308.1118.50

 

26.308.1118.50

  • Product description

    • weiß
    • 8
    • Housing: PC Rotor: PBT
    • 500
    26.308.1118.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • Leuchtstofflampen
  • Product information

    With snap in foot and closed base, IP 40. With foot gasket IP 50. A pair of lampholders provides a lamp length...
26.308.1125
 

26.308.1125.50

 

26.308.1125.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.308.1125.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Snap-in foot 25.5 x 13.3 mm
    • Leuchtstofflampen
  • Product information

    With snap in foot and closed base, IP 40. With foot gasket IP 50. A pair of lampholders provides a lamp length...
26.310.1123
 

26.310.1123.50

 

26.310.1123.50

  • Product description

    • weiß
    • 5
    • Housing: PC Rotor: PBT
    • 500
    26.310.1123.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Leuchtstofflampen
  • Product information

    With cable support Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
26.310.1130
 

26.310.1130.50

 

26.310.1130.50

  • Product description

    • weiß
    • 6
    • Housing: PC Rotor: PBT
    • 500
    26.310.1130.50
  • Properties

    • G13
    • 0,5-1,0 mm²
    • white
    • Push-in pins (for hole pattern 5.5 mm dia. or 4.3 x 4.6 mm)
    • Leuchtstofflampen
  • Product information

    With cable support Snap in pins for IP 40 A pair of lampholders provides a lamp length tolerance compensation of 3 mm
Last viewed
Sprache auswählen
Deutsch
English