NEW

SMD Terminal block - MiniFlex with push wire contacts and contact opening function, 2 pole 46.132.2001.50

PDF

Part no.: 46.132.2001.50
Package: 15600

Ø < 2,1 mm = 8+1mm

Stripped length
Stripped length in mm
Rated impulse voltage
Rated impulse voltage (Uimp) indicates the peak value, to which the component can be used without failure.
CAD
CAD
LED-SMD-Line
SMD terminal block
Single pushwire terminals
Ø 2,1 - 2,7 mm = 9+1mm

Stripped length
Stripped length in mm
0.20-0.75 mm² AWG 24-18

For solid conductors
(for the gauge or cross-sectional range indicated).
0.20-0.50 mm² AWG 24-20

For tinned wire ends within the cross sectional range stated
(for the gauge or cross-sectional range indicated).
0.20-0.75 mm² AWG 24-18

For fine-stranded conductor within the cross sectional range stated

Any questions?

Direct insertion of solid and stranded, tinned wire ends and finely stranded conductors by... more

Close menu

Product information "SMD Terminal block - MiniFlex with push wire contacts and contact opening function, 2 pole"

Direct insertion of solid and stranded, tinned wire ends and finely stranded conductors by using the contact opening function

Contact opening function - also for release of already inserted wires

Mounting and wiring position: PCB top side

Machine-compatible "tape-and-reel" packaging

Fixing: Lead-free reflow soldering according to DIN EN 610760-1, section 6

General note: It is recommended to make an electrical connection between both poles of each polarity on the solder pad..

To operate the contact opening function, we recommend the use of our tools 46.131.U802.89 and 46.131.-397.80.

For further technical data, please refer to the technical data sheet under menu item downloads.

Instructions for soldering process
Suitable for leadfree-reflow-profiles according to DIN EN 61760-1 respective DIN EN 60068-2-58 up to peak-temperature of max. 260°C. Due to different application-specific parameters (component arrangement and alignment, soldering system, solder paste), it is recommended to use test runs to determine a suitable profile under production conditions.

Depending on the SMD soldering process and associated parameters a minor discoloration might occur. However, this will not influence the functionality.

Product name:	SMD Terminal block - MiniFlex with push wire contacts and contact opening function, 2 pole
Table for product detail view:	1
Mounting method 1:	Solder fixing
Material:	Material: Housing: PPA, white Contact material: CuNi Contact surface: hot-dipped tinned
ENEC Rating:	9A / 320V
[URus Rating]:	9A / 320V
Approval:	IEC 60947-7-4, additional cURus
cULus file no.:	E-365006
cUR Rating:	9A / 320V
Quantity of poles:	2
Pkg.:	15600